Flow modeling of high-viscosity fluids in pipeline infrastructure of oil and gas enterprises

Today, the issues related to solving the problem of finding an effective distribution of oil flows through the system of oil pipelines in order to reduce the total energy consumption are relevant. The solution to this problem is connected with selection of rational pumping modes for various technological sections of oil pipelines using modern methods of mathematical programming or new techniques for improving the energy and transport characteristics of oil.Reducing energy consumption during pumping of crude through oil trunk pipelines can be achieved by various methods. Numerous investigations in this direction are mainly carried out to save energy on separate single-line pipelines. However, due to the development of the network of trunk oil pipelines in the world over the past decades, the issues of energy efficient management of oil flows throughout the entire oil pipeline system of oil and gas enterprises become urgent.This paper analyses parameters for pipeline transport of high-viscosity and heavy oils. The article proposes a method for assessing the rheological properties of oil for further planning of pumping taking into account the preservation of oil quality and an increase in energy and transport characteristics. The proposed solutions and tasks for predicting changes in the viscosity-temperature characteristics of the flow for blends of different oil types are especially relevant in the current conditions of an increase in the share of oil production with complex rheological characteristics. Results of the presented investigations may be used for planning the measures of efficient transportation of high-viscosity and heavy oils.     

Mesenchymal Stromal Cell Therapy in Novel Porcine Model of Diffuse Liver Damage Induced by Repeated Biliary Obstruction

In liver surgery, biliary obstruction can lead to secondary biliary cirrhosis, a life-threatening disease with liver transplantation as the only curative treatment option. Mesenchymal stromal cells (MSC) have been shown to improve liver function in both acute and chronic liver disease models. This study evaluated the effect of allogenic MSC transplantation in a large animal model of repeated biliary obstruction followed by partial hepatectomy. MSC transplantation supported the growth of regenerated liver tissue after 14 days (MSC group, n = 10: from 1087 ± 108 (0 h) to 1243 ± 92 mL (14 days); control group, n = 11: from 1080 ± 95 (0 h) to 1100 ± 105 mL (14 days), p = 0.016), with a lower volume fraction of hepatocytes in regenerated liver tissue compared to resected liver tissue (59.5 ± 10.2% vs. 70.2 ± 5.6%, p < 0.05). Volume fraction of connective tissue, blood vessels and bile vessels in regenerated liver tissue, serum levels of liver enzymes (AST, ALT, ALP and GGT) and liver metabolites (albumin, bilirubin, urea and creatinine), as well as plasma levels of IL-6, IL-8, TNF-α and TGF-β, were not affected by MSC transplantation. In our novel, large animal (pig) model of repeated biliary obstruction followed by partial hepatectomy, MSC transplantation promoted growth of liver tissue without any effect on liver function. This study underscores the importance of translating results between small and large animal models as well as the careful translation of results from animal model into human medicine.     

Composition and structure of arsenic–antimony alloy electrodeposited from acidic chloride solution

AsSb alloy (0.70–95.81 wt.% As) was prepared by electrodeposition in As(III) and Sb(III) contained electrolytes. The influence of electrolyte composition, hydrochloric acid concentration, and temperature on the composition and structure of AsSb deposits was studied. The electroreduction mechanism of As(III) and Sb(III) in hydrochloric acid solution was revealed via thermodynamic analysis. The results show that the increase of H⁺ concentration promotes the reduction of As(III), while the increase of Cl⁻ concentration significantly inhibits the reduction of Sb(III). As a result, the As content in deposits increases gradually with the increase of hydrochloric acid concentration. Simultaneously, the phase structure of AsSb deposits evolves from crystalline to amorphous. When the As content is 24.55–33.75 wt.%, AsSb mixed crystal is obtained. The electrolysis temperature has little effect on the deposits composition, but the structure of deposits evolves from crystalline to amorphous with decreasing the temperature.     

42CrMo钢加热过程中的奥氏体晶粒尺寸演变

通过金相试验方法测定42CrMo钢在890~930 ℃下保温10~240 min后的晶粒尺寸。结果表明,42CrMo钢在加热到试验温度890~930 ℃时已经完全奥氏体化,保温过程中的晶粒生长属于正常生长;加热温度对晶粒尺寸的影响较大,保温时间对晶粒尺寸的影响较小;随保温时间的延长晶粒生长缓慢,晶粒尺寸与保温时间满足指数小于1的函数关系。基于试验数据,通过线性回归得到晶粒长大的Beck模型参数,通过非线性回归得到Sellars和Anelli模型参数,3个模型的预测精度都较好,而Anelli模型的适用性要高于Beck模型和Sellars模型,故在预测42CrMo钢的奥氏体晶粒长大规律时宜使用Anelli模型。     

Analytical Modeling for Translating Statistical Changes to Circuit Variability by Ultra-Deep Submicron Digital Circuit Design

This paper presents a physics-based compact gate delay model that includes all short-channel phenomena prevalent at the ultra-deep submicron technology node of 32 nm. To simplify calculations, the proposed model is connected to a compact α-power law-based (Sakurai-Newton) model. The model has been tested on a wide range of supply voltages. The model accurately predicts nominal delays and the delays under process variations. It has been shown that at lower technology nodes, the delay is more sensitive to threshold voltage variations, specifically at the sub-threshold operating region as compared with effective channel length variations above the threshold region.     

钻井机器人的连续油管钻压和钻速控制模型

连续油管钻井机器人利用机身内外的钻井液压力差作为动力源，可在牵引连续油管的同时加载钻压。以钻井机器人为基础，建立连续油管钻柱动力学模型，并推导出通过钻井液排量控制钻压和钻速的单参数控制数学模型；对钻井机器人引入调速回路，建立具有调速功能的钻柱动力学模型；在溢流阀调定压力大于机身内外压差时，推导出利用钻井液排量和节流阀流通面积两种参数控制钻压、钻速的数学模型，在溢流阀调定压力小于机身内外压差时，推导出利用钻井液排量、节流阀流通面积和溢流阀调定压力3种参数控制钻压、钻速的数学模型；以11.43 cm（4.5英寸）井眼为例，对上述3种数学模型进行了分析。分析结果表明：钻压、钻速随钻井液排量的增加基本呈线性增加，在钻井液排量大于0.005 m³/s时，钻井机器人能够向前爬行，在钻井液排量大于0.005 7 m³/s时，钻头能够正常钻进；调节节流阀流通面积和溢流阀调定压力，可以在一定范围内无级调钻压和钻速；3种控制方法相结合，可以实现小排量、大钻压，及大排量、小钻压等钻井参数的控制。以控制模型为基础，针对不同井下工况建立钻进工艺的专家数据库，以钻井机器人为"大脑"，结合井下随钻测量数据就能够实现闭环控制，自动钻进。     

Computational modelling of water flow inside laboratory Knelson concentrator bowl

Enhanced gravity concentrators such as Knelson concentrator (KC) are extensively used in the mineral processing industry. The complexities of KC bowl geometry and variation of feed characteristics have forced process engineers to design empirically new units using laboratory and pilot-scale Knelson concentrators. However, numerical modelling methods such as computational fluid dynamics (CFD) and discrete element method (DEM) provide a better insight of flow behaviour of fluid and particulate solid phases inside these processing units. This article reports findings of CFD simulations for single-phase water flow inside the laboratory KC. An available standard 7.5-cm laboratory KC bowl was numerically simulated using realisable k-ε turbulence model to resolve the turbulence dispersion of existing transitional flow regime. The effects of relative centrifugal force (RCF) intensity and bed fluidisation water flow rate on the water velocity and pressure distributions were studied. Simulations confirmed the swirling flow pattern governing inside the bowl. The results revealed that the impact of RCF intensity on the water field values is greater than that of bed fluidisation water flow rate. Both velocity and pressure variations inside the bowl rings followed a linear trend.     

基于孪生支持向量回归机的转炉炼钢终点预测

为了提高转炉炼钢的终点命中率，建立了一种新的转炉终点预测模型，实现了对转炉终点碳质量分数和温度的准确预测。模型采用K最近邻孪生支持向量机(KNNWTSVR)算法，将权重矩阵引入到目标函数中，并利用鲸群优化算法进行求解，提高了传统算法的性能；然后基于某炼钢厂260 t转炉的实际生产数据，建立了转炉炼钢终点预测模型。结果表明，预测模型的终点碳质量分数(误差±0.005%)和温度(误差±15 ℃)的终点单命中率分别为94%和88%，双命中率达到84%。与其他两种现有的建模方法相比，本模型取得了最优的预测效果。该方法满足转炉炼钢实际生产的需求，也可适用于钢铁冶金其他领域的数学建模。